
Caduceus for OM-3 is an open-source firmware patch for the OM System OM-3 that adds on-camera colour editing for the COLOR 1 to 4 profiles (Monochrome is not covered). It is built on the Caduceus project for the Olympus PEN E-P7. A web control panel lets you make your own looks and save them to the card, and the project ships starter film looks. A 43 Rumors post dated within the last week reports the follow-up v0.26.2 release. It adds split toning, fixes a freeze with RAW+JPEG and loads film presets automatically from the SD card at start-up.
The patch works only on an OM-3 running official firmware 1.1. The launcher fetches OM's own 1.1 update from OM's server, checks it byte for byte, applies the patch on your computer (Python 3 needed, Mac or Windows launcher) and produces an update file for the SD card. No OM firmware is distributed. The card also needs a GUIDES.BIN file from the same release as the firmware, or settings will change without affecting the photo.
The project calls itself unofficial and experimental, to be used at your own risk, and says it is not affiliated with OM Digital Solutions. Use a fully charged battery. To undo it, you reinstall the official 1.1 firmware, a copy of which the launcher saves for you.
Gear in this article
Affiliate links: we may earn a commission when you buy, at no extra cost to you. As an Amazon Associate I earn from qualifying purchases. More